Language
Chinese
Blog

Focus on LiFePO4 Battery Manufacturing for 18 Years

Home > Blog > Industry News

Precautions for use of lithium battery UPS.

Web:www.topbandbattery.com     Date:2022-11-03

Precautions for use of lithium battery UPS are as follows:


1. Precautions for installation of lithium battery UPS: The storage area of lithium battery UPS must be well ventilated, away from water, flammable gas and corrosive media, and ensure that the air outlet of the rear cover fan and the side of the box are unobstructed.


2. UPS needs to be closely monitored. In order to realize the power protection system, only audible and visual alarm is required.


3. Some UPS use external battery pack to extend the power supply time, and the quality of the external battery directly affects the discharge time of the UPS. Therefore, special attention should be paid to the use and maintenance of the external battery pack when using this UPS.


4. Pay special attention not to overload when using UPS.


5. The general load has an impact current at the moment of starting, and the UPS internal power component has a certain safe working area range. Although a certain margin will be reserved when selecting, the excessive impact current will shorten the service life of the component, or even cause damage to the component. Therefore, the damage caused by the impact current should be minimized during use.


6. It is necessary to turn off the loads one by one, and then turn off the UPS panel to make the UPS in bypass operation, while the charger continues to charge the battery pack. If UPS output is required, please completely turn off the UPS, and then disconnect the input mains power.


7. Efficiency is a key indicator of UPS, especially high capacity UPS. Under full load, the greater the ratio of output power to input power, the higher the efficiency of UPS.


8. Regularly maintain the lithium battery UPS power supply: remove the dust from the UPS power supply, measure the lithium battery voltage, replace unqualified batteries, check the fan operation status, detect and adjust the system parameters of the UPS power supply, etc.



Shenzhen Topband Battery Co., Ltd.,established in 2006, is a wholly-owned subsidiary of Shenzhen Topband Co., Ltd. (002139.SZ). We focus on lithium iron phosphate batteries,with independent research and development in cells and BMS. With the ability to integrate the entire industry chain, we are committed to providing customers with one-stop lithium battery solutions and services. Our quality products are widely used in energy storage and light power.


Related Blog
Why you need the 51.2V 100Ah battery from Topband to support your electricity supply?
Why you need the 51.2V 100Ah battery from Topband to support your electricity supply?
How to Equip the New Energy System for Solar Water Pump?
How to Equip the New Energy System for Solar Water Pump?
Guardian of the Information Age】TOPBAND Battery: The Green Heart of Telecom Base Station Backup Power Storage
Guardian of the Information Age】TOPBAND Battery: The Green Heart of Telecom Base Station Backup Power Storage
The Future of Light Power in a New Era of Energy Storage: Green, Efficient, and Intelligent
The Future of Light Power in a New Era of Energy Storage: Green, Efficient, and Intelligent
About Us
Company Profile R&D Center Manufacturing Honor Company Video Sitemap
Products
Cell Energy Storage Motive Battery
Blog
Company News Events News Industry News
Contact Us
Add:Topband Industrial Park,LiYuan Industrial
Zone,Shiyan,BaoAn District,Shenzhen,China.
Tel:+86-755-2765 1888
E-Mail: support@topbandbattery.com

INQUIRY NOW!